AU2000

MEASURING THE SPEED OF SOUND IN DIFFERENT MATERIALS

The CEBTP has improved new equipment for measuring the speed of sound in different materials.
There is nothing on the market equal to the AU 2000 in terms of precision and ease of use. The signal is displayed as it immerges from the material, propagation time is calculated, the signal arrival point is displayed, and data is stored.
The AU 2000 conforms completely with the P 18 - 418 sonic auscultation standard

APPLICATIONS :

  • Measuring the speed of sound in building materials such as concrete, masonry, stone, wood...
  • Determinig the quality of materials by heterogeneous investigation, for pockets, cracks.
  • Localizing areas that have suffered external damage: concrete attacked by frost or fire.
The AU 2000 is the only one equipment allowing to show the signal and the position of the delay cursor

CHARACTERISTICS :

  • In compliance with electrical standards concerning portable measuring equipments
  • In compliance with the EC standard
  • In compliance with the P 18 - 418 sonic auscultation standard
  • 0,1 µs resolution ( Class 0.1 equipment)
  • Dimensions : 290 mm x 200 mm, height : 55 mm
  • Weight : 2.9 Kg
  • IP 52 watertightness
  • Received signal display, with overrideable automatic and manual signal measurement
  • LCD screen using Transflective technology ( perfect display even in broad daylight)
  • Internal battery with seven hours autonomy
  • High transmission power with capacity to measure thicknesses of concrete over five meters.
  • Data storage with possibility of transfer to an office PC in ASCII format

THE AU 2000 IS DELIVERED COMPLETE AND READY FOR USE WITH THE FOLLOWING EQUIPMENT :

  • One AU 2000 unit with data input software
  • One emitter sensor with five meters cable
  • One receiver sensor with five meters cable
  • One battery charger and mains power supply
  • One reference sample glass
  • One tube of grease
  • One data transfer cable
  • One data transfer software
  • One user's manual in English
  • One case to carry and protect the whole equipment
Transparent or direct
transmission method
Surface transmission method
The emitter and receiver are applied on the opposite faces of the element to be measured.
The emitter and receiver are applied on the same plane face of the element to be measured.


DATA TRANSFER :

The AUGETDATA © data transfer software allows to protect very easily measures on a desktop computer.
There data are exported in ASCII format.
They can therefore be open en Excel © software.


<Other CEBTP materials>

You can obtain a complete set of documents about these new equipments
quickly by simply placing a request at :

M. Ludovic DENIS ou M. Frédéric BOURDET

By Email :
l.denis@cebtp.fr / f.bourdet@cebtp.fr
By Télécopie : +33 1 30 85 23 79
By courrier :
CEBTP
Service matériels
Domaine de St Paul - BP 37
78470 Saint Rémy-lès-Chevreuse
France

The texts in the present document only have an information purpose, and neither their author nor CEBTP are committed by them. The texts, schemes and photographs represented in the present pages are an exclusive property of CEBTP and they cannot be reproduced under any form without a previous written authorization of CEBTP Copyright © 2001, CEBTP All rights reserved.